Ecomax® 8220 is a multipurpose water-based, colorless, 2-component epoxy primer, diluted with water, which is open to water-steam.
The main application is as primer for water-based epoxy floor coating systems, paint over fresh concrete, painted on AM- wet concrete, painted concrete against loss of fresh water, chemical resistant paints, non-toxic waste.
An important application of this product can be painted directly on the surface of fresh concrete 8-24 hours old or new plastered walls. Its good adhesion to wet surfaces and acts as an anti-dehydration additive for fresh concrete and curing removal costs, shorten the timeout painted with traditional technologies.
For some commonly used epoxy products on the market, the paint on damp and wet concrete is impossible. But for Ecomax® 8220, it is entirely possible.
Feature-based paint wet on wet and is due to the nature allows moisture to escape through the film. Properties that allow the coating adhesion and maintain long-term adhesion properties was down almost radical phenomenon membrane peeling paint due to moisture infiltration.
Primers are completely Ecomax® 8220 may be constructed on concrete or concrete enough days old.
It can also be used to make high strength concrete, plaster made rugged and high compression resistance, or mortar patch or fix mattit smooth patch for the preparation of the surface to a thickness of a few tens of microseconds meter to over 1 cm. The products are not allowed to coordinate with cement only mix asphalt macadam mixture of solid gold sand, quartz sand, stone powder … only.
Ecomax® 8220 baits can also be used to patch the asphalt surface in the house.
The main application area is the construction of hospitals, laboratories, pharmaceutical projects, water tanks, food tanks, warehouses, industrial plants, factories, garages, stations, stadiums …
2 mixing ratio of component A / B = 100/20.
Packaged in pairs, weighing 5, 10 and 20kg or as required.